Code and apply to implant: - D01: Apply to implant OSSTEM (M), SNUC (M), Neobiotech (M), Cowellmedi (M). - D02: Apply to implant OSSTEM (R), One day biotech (R), Dentium (R), SNUC (R), DIO UF2 (R), Neobiotech (R), Cowellmedi(R). - D03: Apply to implant Nobel Active (RP). - D04: Apply to implant Nobel Active (NP). - D05: Apply to implant Straumann (RC). - D06: Apply to implant Straumann (NC). - D07: Apply to implant Straumann BLX/BLT. - D08: Apply to implant Anthogry Axiom. - D09: Apply to implant DIO UF2 (M), MEGAGEN (M), Oneday biotech (M). - D10: Apply to implant ICX (M). - D11: Apply to implant ICX (R). - D12: Apply to implant ABT (Alpha-Bio Tec). - D13: Apply to implant Zimmer3.5, MIS/Lance, ADIN. - D14: Apply to implant C-TECH/BL, BB (R), Neodent (R). - D15: Apply to implant BB (M). - D16: Apply to implant MEGAGEN AnyRidge. - D17: Apply to implant BEGO. - D18: Apply to implant Zimmer (R), MIS/Lance (R). Features: - Reusable SmartPeg: Up to 20 times without any deviation and reusable, autoclavable, calibrated, and compatible with all major implant systems. - Step 1: Select the correct SmartPeg for the implant being measured. - Step2: Install the Smart Peg.(Hand-tighten, 6-8 N.cm of torque). - Step 3: Turn on the instrument and hold the tip of the instrument close to the top of the SmartPeg. - Step 4: The instrument emits a beeping sound when it starts measuring and another sound when the value is presented on the display a second later. - More reliable immediate loading: Raise the implant success ratio with accurate diagnostics and confidence to decide the optimal loading time. - Measure from different directions, record 3 to 5 pieces of data, and take the average as the final result. - Numerical range: 1-99, the higher the value, the stronger the stability of the implant and the better the degree of bone integration. - Low test values (such as <50): It indicates insufficient bone integration, and the loading should be delayed, or the bone healing condition should be further evaluated. - High test value (such as >70): It indicates that the stability of the implant is good and it can be considered to enter the restoration stage. - Made in Korea.